User Tools

Site Tools


This is an old revision of the document!

  1. A safety interlock shall not be used to turn off the Accelerator and/or beam, except in an emergency, or when testing the safety interlock. Routine shutdown shall be done following normal operating procedures and normal controls.
  2. No Operator will intentionally bypass a safety interlock.
  3. Discovery of a failed safety interlock or warning device will suspend all operations until that failure can be repaired.
  4. If, for any reason, the TALC finds it necessary to intentionally bypass a safety interlock this action shall be:

Authorized by the OU Radiation Safety Officer

Recorded in the Electronic Logbook and emailed to all recipients

Posted as a written notice at the Accelerator Control Console, and

Terminated as soon as possible.

playground/interlock.1328896034.txt.gz · Last modified: 2012/02/10 12:47 by jacobs