Accelerator Handbook

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

==== Switching Extension Legs ====

** Switching Extension Legs **

   1. Turn power switch on ( white lights will come on).
   2. Select leg.
   3. Turn power off (interlock light will light leg selected).
   4. Turn power to on again ( on light will not light yet ).
   5. Turn quad supply on (swithcon right thant says "off").
   6. You can now operate quad.

To go to another leg.

   1. Run quad.  supply to zero and turn off power ( switch to left).
   2. Select another leg (lighs will remain the same).
   3. Turn power off.
   4. Interlock for leg selected will come one.
   5. Turn power on and quad on and continue as above.

NOTE:   Always turn quad power off before attempting to switch legs.   Switching magnet polarty must be done in a separate operation.

* Original Credits *
Maintained by:
Thomas N. Massey
Office: Accelerator Lab 217
Telephone: (740)593-0933
E-Mail: MASSEY@OHIOU.EDU
Last modified on 10/29/98

Accelerator Handbook

User Tools

Site Tools

Page Tools