User Tools
playground:change
This is an old revision of the document!
Changing Terminal Energy
1. Switch OVERVOLTAGE PROTECTION to DISABLE.
2. Switch the control mode to GVM.
3. Turn the CONTROL GAIN to zero.
4. To go to a higher energy move the corona position “OUT” and increase the CHARGING VOLTAGE. NEVER allow the GRID VOLTAGE to go more negative than -10 VDC.
5. Switch CHAIN MOTORS to OFF.
6. Switch POWER SUPPLIES to OFF.
7. Turn the TERMINAL VOLTAGE dial to zero.
playground/change.1328577063.txt.gz · Last modified: 2012/02/06 20:11 by 50.41.34.104
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
