Facility Shutdown

1. Put in all cups
2. Shutdown the Accelerator
3. Shutdown the Source
4. Run all magnets down to zero (unless otherwise instructed, leave magnet power supplies on, but at zero)
5. Set all electrostatic devices to zero or neutral, and then turn off
6. Turn off the Beam Profile Monitor
7. Close Gate Valves: Beam Leg, HE Tube, LE Tube, and Source Tube.
8. Write a Header File with description “shutdown” and record DRD accumulated dose.
9. Turn off DRDs
10. Turn off TVs
11. Turn off all normal room lights