Accelerator Handbook

User Tools

Site Tools

Trace: • beam_profile_monitors • pulsing • drd • fire • pelletron • integrator • nmr
playground:quadcontrols

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
playground:quadcontrols [2012/03/16 14:51] – carterplayground:quadcontrols [2026/06/25 16:12] (current) – external edit 127.0.0.1
Line 20: Line 20:
   * When the mouse cursor is moved below the X axis and to the left of center **Step Mode QuadA** allows adjusting the QuadA currents up and down 1 step at a time using the same resolution that the mouse movements were using.  Left mouse button steps QuadA current down 1 step and the right mouse button steps the QuadA current up 1 step.   * When the mouse cursor is moved below the X axis and to the left of center **Step Mode QuadA** allows adjusting the QuadA currents up and down 1 step at a time using the same resolution that the mouse movements were using.  Left mouse button steps QuadA current down 1 step and the right mouse button steps the QuadA current up 1 step.
   * When the mouse cursor is moved below the X axis and to the right of center **Step Mode QuadB** allows adjusting the QuadB currents up and down 1 step at a time using the same resolution that the mouse movements were using.  Left mouse button steps QuadB current down 1 step and the right mouse button steps the QuadB current up 1 step.   * When the mouse cursor is moved below the X axis and to the right of center **Step Mode QuadB** allows adjusting the QuadB currents up and down 1 step at a time using the same resolution that the mouse movements were using.  Left mouse button steps QuadB current down 1 step and the right mouse button steps the QuadB current up 1 step.
-  * Momentarily depressing the left mouse button when in the main field of the plot will set the step[ resolution 1 level finer. +  * Momentarily depressing the left mouse button when in the main field of the plot will set the step resolution 1 level finer. 
-  * Momentarily depressing the right mouse button when in the main field of the plot will set the step[ resolution 1 level more coarse.+  * Momentarily depressing the right mouse button when in the main field of the plot will set the step resolution 1 level more coarse.
   * The **Save** button will save the current values of the QuadA and QuadB currents.  These values may be restored using the **Rest** button.  This is very useful when you try to improve beam tuning and find that you have only made things worse.  Remember to press the **Save** button before making changes to a previously good tune of the quad so you can **Rest** if you find you made things worse.   * The **Save** button will save the current values of the QuadA and QuadB currents.  These values may be restored using the **Rest** button.  This is very useful when you try to improve beam tuning and find that you have only made things worse.  Remember to press the **Save** button before making changes to a previously good tune of the quad so you can **Rest** if you find you made things worse.
 +  * Sometimes, when a large step in quad current is attempted too quickly, the power supply currents will start oscillating and will not respond to adjustments of the computer control.  If this happens, turn of the quad main power at the quad console, run the quad currents to 0 using the **Grab** function, then turn the supply back on and reset the currents.
  
- +//[[carter@ohio.edu|Don Carter]] 2012/03/21 10:56//
playground/quadcontrols.1331923865.txt.gz · Last modified: (external edit)