Accelerator Handbook

User Tools

Site Tools

Trace: • water_systems_info • temperature_control • trip • pulsing • oxygen_monitors • keyholder_training_flow • console • nmr • interlock • pellet
playground:nmr

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
playground:nmr [2025/06/17 11:07] – carterplayground:nmr [2026/06/25 16:12] (current) – external edit 127.0.0.1
Line 4: Line 4:
    - Depress POWER switch if not illuminated.    - Depress POWER switch if not illuminated.
    - After a 1 minute warm up period a horizontal line should appear on the oscilloscope face.    - After a 1 minute warm up period a horizontal line should appear on the oscilloscope face.
-   - Note: The oscilloscope now used islocated on the console under the BPM oscilloscope (up and left of the NMR).+   - Note: The oscilloscope now used is located on the console under the BPM oscilloscope (up and left of the NMR).
    - You may have to adjust the VERTICAL POSITION control to find the horizontal line.    - You may have to adjust the VERTICAL POSITION control to find the horizontal line.
    - Set the HORIZONTAL SWEEP to 60.    - Set the HORIZONTAL SWEEP to 60.
playground/nmr.1750172853.txt.gz · Last modified: (external edit)