Differences

This shows you the differences between two versions of the page.

--- playground:interlock [2012/02/20 09:05] – jacobs
+++ playground:interlock [2026/06/25 16:12] (current) – external edit 127.0.0.1
@@ Line 5: / Line 5: @@
     - Interlock Testing:  Testing of any one device will be sufficient to demonstrate proper operation of that device's interlock circuit.  A different device on the interlock circuit will be tested at every three month interval.
     - All audible and visual indicators will be checked for proper operation during each test.
-    - In the event the safety equipment is operating improperly, it shall be immediately reported to the RSO/IRRP and shall be repaired or replaced and never bypassed so as to enable radiation production.
+    - **In the event the safety equipment is operating improperly, it shall be immediately reported to the RSO/IRRP and shall be repaired or replaced and never bypassed so as to enable radiation production.**
   - Calibration of fixed and portable monitoring equipment shall be the responsibility of the RSO/IRRP.
     - Calibrations shall be at intervals not to exceed one year and after each servicing or repair.
     - Records of calibrations shall be maintained in the Testing, Calibration, and Shutdown Book.
-    - Portable monitoring equipment shall be tested for proper operation daily, prior to use, when in use.
+    - **Portable monitoring equipment shall be tested for proper operation daily, prior to use, when in use.**
-  - A safety interlock shall not be used to turn off the Accelerator and/or beam, except in an emergency, or when testing the safety interlock.  Routine shutdown shall be done following normal operating procedures and normal controls.
+  - **A safety interlock shall not be used to turn off the Accelerator and/or beam, except in an emergency, or when testing the safety interlock.  Routine shutdown shall be done following normal operating procedures and normal controls.**
-  - No Operator will intentionally bypass a safety interlock.
+  - **No Operator will intentionally bypass a safety interlock.**
-  - Discovery of a failed safety interlock or warning device will suspend all operations until that failure can be repaired.
+  - **Discovery of a failed safety interlock or warning device will suspend all operations until that failure can be repaired.**
   - If, for any reason, the TALC finds it necessary to intentionally bypass a safety interlock this action shall be:
     - Authorized by the OU Radiation Safety Officer